REVIEW: ALPHA DELTA ASC ANTENNA COAX SWITCH


PRODUCT REVIEW:  

ALPHA DELTA ASC ANTENNA COAX SWITCH

(Original 2015 post updated: Oct 22, 2018)


 I use a fabulous antenna switch in my radio shack. It's made by Alpha Delta Communications, Inc in the U.S.A. The model is the ASC Delta-4 and it's a really sturdy unit that should last a lifetime! You can switch up to four antennas and it has some inbuilt lightning protection. However, in reality, probably only protection from static buildup on the antenna, as a direct and powerful lightning hit could still prove pretty devastating. If you are running multiple antennas into your shack, this switch or any of the other models offered by Alpha Delta Communications are well worth considering. I'm very happy with my addition to the shack.

Here is a YouTube video I have prepared with more information on this product, along with some actual "on air" examples of the switch in use. Best viewed in 720p HD. Also below, I have taken some close-up photos for you. 
I hope you found this review of interest. More information can be obtained from www.alphadeltacom.com

 73 and good DX!!

 Rob Wagner VK3BVW






 Subscribe!!










Comments

  1. AnonymousApril 13, 2015 at 12:26 AM

    Might be nice to list any average pricing and where-to-buy possibilities. Found average pricing range is $59 to $99 depending on model.

    ReplyDelete
    Replies
    1. Rob WagnerApril 13, 2015 at 8:59 AM

      Thanks for your suggestion. I don't usually list prices, as this blog has many readers in different parts of the world. Prices would vary greatly depending on shipping costs, where the items were purchased, and foreign exchange rates at the time. I imported my Alpha Delta 4-position desk console switch from DX Engineering in the USA. It retails for US$149.95. Yes, it's more expensive than many other units, but as I said, it will last for years (plus it has the lightening protection device). 73, Rob

      Delete

Post a Comment

Comments are moderated and may not appear immediately. If your comment isn’t visible right away, it has been received and will be published shortly.

Popular posts from this blog

RETRO RECEIVER REVIEW # 21 - The Kenwood R-5000

Image
RETRO RECEIVER REVIEW #21 (You can click on all photos in this article for a close-up view) KENWOOD R-5000 Performance and Innovation by ROB WAGNER VK3BVW This extended blog post first appeared as a feature article in the February 2024 issue of The Spectrum Monitor magazine. Further details on this excellent publication are available at www.thespectrummonitor.com I have always wanted to own a Kenwood R-5000 receiver. Perhaps I was dazzled by the mystique that appeared to surround this rig. Somehow, it had always been on top of my bucket list of pre-loved rigs that I wanted sitting on the desk of the radio shack.  Finally, one showed up at a local Sunday morning Hamfest, and I happened to have just enough dollars in my pocket to make a purchase. It appeared to have lived a hard life. The case looked knocked around and was pretty dirty inside and out. So, while I would have liked to have owned a unit in better condition, the price was right, and I decided to take it on as a l...
Read more

REVIEW: WELLBROOK ALA1530S+ LOOP ANTENNA

Image
PRODUCT REVIEW: WELLBROOK ALA1530S+ LOOP ANTENNA by Michael Stevenson (Guest Contributor) This is a review and my opinion of the Wellbrook ALA1530S+ P–1 Active receiving Antenna. For further information, details and specifications then please visit: www.wellbrook.uk.com Background I have been a keen shortwave listener since 1970 and have had many receivers and antenna types during this time. Currently I have two wire antennas, a PAR Electronics EF-SWL 15 meter with impedance matching transformer, made in the US; and a home made 17 meter wire with balun. I also have a dedicated multi-stake ground or earthing system to compliment my receiver and antennas. I live in suburbia Port Macquarie, New South Wales on the east coast of Australia. Even though all our electricity wiring is under ground in our housing estate, I live in an environment where there are all types of man-made noises coming from modern electronic and electrical equipment used by my neighbours The wire a...
Read more

RETRO RECEIVER REVIEW #20 - The SONY ICF-5900W

Image
RETRO RECEIVER REVIEW #20 SONY ICF-5900W by CRAIG SEAGER VK2HBT This time around, I thought we might direct our attention to one of the many portable receivers of yesteryear, and it is perhaps appropriate that we choose a manufacturer that continued to produce quality equipment featuring shortwave coverage until long after. I’m sure our Japanese friends will concur with the submission that Japan is a land of short-lived, but enthusiastically embraced fads.  Whether it be karaoke, yo-yos with brains, electronics pets or Pokémon, each craze sweeps the country in such a way that captures the attention of the rest of the world and is usually associated with some pretty smart home-grown technology.   In the mid to late 1970s, shortwave listening (or “BCL”) was the flavour of the month, with teenagers (and some older folk!) compiling large QSL collections and forming SWL and DX clubs all over the country.  Nowadays, you’d be fairly hard-pressed to find any external broadcas...
Read more