RESTORING THE KENWOOD R-5000 RECEIVER - PART 4


RESTORING THE KENWOOD R-5000 RECEIVER
PART 4


The R-5000 can become quite hot when operated on the AC mains power, especially if used for longer than an hour. Over time, this is not such a good environment for electronic components on the boards near the power transformer. Also, as many of you know, I enjoy taking myself off on DXpeditions, so using the R-5000 from a 13.8v portable power source would be a distinct advantage for me.

 This short video demonstrates the installation of an optional DC power socket and cable for the receiver. It's an easy modification to make and I can now see myself sitting down to enjoy operating the R-5000 out-in-the-field somewhere by the beach or under a tree by a river!


Missed Parts 1, 2 and 3 of this series? Catch them here at:

RESTORING THE KENWOOD R-5000 RECEIVER - PART 1

 RESTORING THE KENWOOD R-5000 RECEIVER - PART 2

 RESTORING THE KENWOOD R-5000 RECEIVER - PART 3

 73 and good DX to you all.

 Rob Wagner VK3BVW






Comments

  1. RadiocollectorFebruary 3, 2021 at 8:45 PM

    Hi Rob,
    Just picked up a nice 5000. It is a 110VAC model but while I can run it on an external 13.8 vDC, it would be nice to convert it to 240 VAC. Do you have a "parts" radio that may have a 240 VAC power transformer? Other parts that would be nice would be a medium filter, voice module and VHF module but not mandatory. I also need the display driver chip for a Kenwood R1000.
    Look forward to hearing from you.
    Cheers..... Phil vk2gjf

    ReplyDelete
    Replies
    1. Rob WagnerFebruary 4, 2021 at 9:01 AM

      Hi Phil. Sorry, no parts radio here for you to scavenge, unfortunately. Mine is 240v but I run it exclusively on 13.8v which cuts down considerably the heat that is created inside the AC section of the radio. On occasions, I have seen people selling R5000 parts on eBay, usually international sellers, and usually at ridiculous prices! Good luck with your parts list!, 73 , Rob VK3BVW

      Delete
  2. RadiocollectorFebruary 3, 2021 at 8:54 PM

    Hi Rob,
    Just picked up a nice 5000. It is a 110VAC model but while I can run it on an external 13.8 vDC, it would be nice to convert it to 240 VAC. Do you have a "parts" radio that may have a 240 VAC power transformer? Other parts that would be nice would be a medium filter, voice module and VHF module but not mandatory. I also need the display driver chip for a Kenwood R1000.
    Look forward to hearing from you.
    Cheers..... Phil vk2gjf

    ReplyDelete

Post a Comment

Comments are moderated and may not appear immediately. If your comment isn’t visible right away, it has been received and will be published shortly.

Popular posts from this blog

RETRO RECEIVER REVIEW # 21 - The Kenwood R-5000

Image
RETRO RECEIVER REVIEW #21 (You can click on all photos in this article for a close-up view) KENWOOD R-5000 Performance and Innovation by ROB WAGNER VK3BVW This extended blog post first appeared as a feature article in the February 2024 issue of The Spectrum Monitor magazine. Further details on this excellent publication are available at www.thespectrummonitor.com I have always wanted to own a Kenwood R-5000 receiver. Perhaps I was dazzled by the mystique that appeared to surround this rig. Somehow, it had always been on top of my bucket list of pre-loved rigs that I wanted sitting on the desk of the radio shack.  Finally, one showed up at a local Sunday morning Hamfest, and I happened to have just enough dollars in my pocket to make a purchase. It appeared to have lived a hard life. The case looked knocked around and was pretty dirty inside and out. So, while I would have liked to have owned a unit in better condition, the price was right, and I decided to take it on as a l...
Read more

REVIEW: WELLBROOK ALA1530S+ LOOP ANTENNA

Image
PRODUCT REVIEW: WELLBROOK ALA1530S+ LOOP ANTENNA by Michael Stevenson (Guest Contributor) This is a review and my opinion of the Wellbrook ALA1530S+ P–1 Active receiving Antenna. For further information, details and specifications then please visit: www.wellbrook.uk.com Background I have been a keen shortwave listener since 1970 and have had many receivers and antenna types during this time. Currently I have two wire antennas, a PAR Electronics EF-SWL 15 meter with impedance matching transformer, made in the US; and a home made 17 meter wire with balun. I also have a dedicated multi-stake ground or earthing system to compliment my receiver and antennas. I live in suburbia Port Macquarie, New South Wales on the east coast of Australia. Even though all our electricity wiring is under ground in our housing estate, I live in an environment where there are all types of man-made noises coming from modern electronic and electrical equipment used by my neighbours The wire a...
Read more

RETRO RECEIVER REVIEW #20 - The SONY ICF-5900W

Image
RETRO RECEIVER REVIEW #20 SONY ICF-5900W by CRAIG SEAGER VK2HBT This time around, I thought we might direct our attention to one of the many portable receivers of yesteryear, and it is perhaps appropriate that we choose a manufacturer that continued to produce quality equipment featuring shortwave coverage until long after. I’m sure our Japanese friends will concur with the submission that Japan is a land of short-lived, but enthusiastically embraced fads.  Whether it be karaoke, yo-yos with brains, electronics pets or Pokémon, each craze sweeps the country in such a way that captures the attention of the rest of the world and is usually associated with some pretty smart home-grown technology.   In the mid to late 1970s, shortwave listening (or “BCL”) was the flavour of the month, with teenagers (and some older folk!) compiling large QSL collections and forming SWL and DX clubs all over the country.  Nowadays, you’d be fairly hard-pressed to find any external broadcas...
Read more